Where should you install emergency lighting?

Some common places to install emergency or exit lighting include:

◭ Windowless rooms larger than a broom closet

◭ Stairs designated as emergency exits

◭ Aisles or hallways leading to exits

◭ Ramps leading to exits

◭ Escalators leading to an exit

◭ All exit points to areas open to the public

◭ Doors equipped with delayed exit locks

◭ Doors with new sensor-release electronic locking systems

 

When planning an emergency lighting installation, you need to be aware that:

◭ Commercial, industrial, institutional, educational, religious, medical and many other building types often require emergency lighting.

◭ Emergency lights must be spaced correctly to prevent spots of excessive light and darkness.

◭ Sometimes allowance can be made for large window areas that provide high levels of natural light.

◭ Remember that lights must be properly aimed to illuminate the sidewalk. Bulbs pointing toward the ceiling or walls do not meet code requirements, even if they are installed in the correct location.

 

However, there are three situations where emergency lighting is not required, including:

◭ The building is used only during daylight hours if sufficient natural light is available to provide the required level of illumination. Natural light must illuminate all paths to exits.

◭ Structures that are infrequently occupied.

◭ Towers that can accommodate up to three people at a time and provide escape ladders.

 

When to test emergency lighting systems?

Because people rely on emergency and exit lights to safely guide them out of dangerous situations, it is important to ensure that the system is functioning properly by testing it regularly. In fact, by not following the necessary testing guidelines, you not only risk the building's occupants, but also violate life safety codes designed to prevent emergency lighting failures.

 

It is important that trained fire and life safety technicians follow the following monthly and annual maintenance schedules to ensure that emergency and exit lights are working when they are needed

Monthly:

◭ Ensure emergency lighting is installed according to code

◭ Inspect equipment for physical damage

◭ Perform the required 30-second push test switch

◭ Check the lights and make sure they are properly aimed

Annually:

◭ Conduct a complete inspection of the unit

◭ Complete the required 90-minute test of the battery and lighting system

◭ Check the condition, voltage and manufacture date of the batteries

◭ Check AC/DC lamps or bulbs for damage and proper operation

◭ Ensure proper operation of charging circuitry

◭ Label each lamp with an emergency lighting test label after the annual test is complete

 

When an emergency or power outage affects your business, it's important to have reliable emergency lights and clearly marked exits. It is equally important to understand the installation, testing and maintenance requirements set by state and local authorities to ensure that all emergency lights and egress lights continue to work properly.